Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Recent content by jclind1966
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I have a dealer less than 2 miles away but when I was doing my research I found an online dealer
http://www.fredsmusicandbbq.com/mobile/Product.aspx?ProductCode=GMGDBWF
Good luck
I'm looking real hard at the Green Mountain. I have a dealer just down the street and it would be nice to keep the $ in the local economy.
Then I find out I can get pellets directly from CookinPellets way cheaper than on line and pick them up directly from the company. I just need to drive 40...
I have been running my modified ECB fir almost 5 years now (http://www.smokingmeatforums.com/t/91073/just-finished-my-ecb-mods) and I want to upgrade to something larger. I really like the idea of the pellet smoker (real wood and ease of use). I think I've decided on the Rec Tec, they have a 6...
I'm planning to get a BSK but I want to know if any one has built a wood cart for theirs similar to the carts everyone builds for the BGE?
Is the outside hotter or cooler than the BGE?
I assume that the BSK could be bolted down using the mounts from the factory legs.
I got a 3 pack off eBay and a BGE gasket also from eBay
Order a WSM vent damper replacement kit from Weber at 800-446-1071. It consists of three dampers and fastening hardware: 1/4-20 x 5/8" truss head screws, 1/4" flat washers, and 1/4-20 inch acorn nuts.
The Weber WSM vents usually come in a 3 pack. You can use one for the lid and 2 for the base. All you need is a 1/4 inch drill bit and a 3/4 inch hole saw.
Here are the mods I did to my gourmet, the top vent is from a weber and can be ordered online to seal the lid I used a BGE gasket also available online.
http://www.smokingmeatforums.com/for...ad.php?t=91073
good luck
contact me if you have questions