Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Recent content by irbythoc
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Haven't decided whether to go with a tape gasket or high-temp silicone to seal it up. I'm confident that the Permatex Red RTV is fine for the smoker box, but not sure about the fire box.
I've been using old barbecue racks wrapped with alluminum foil for a half-assed baffle and tuning plate, so...
Now that I familiarized myself with my Highland smoker over the summer, I'm ready to perform the proper mods.
Haven't decided whether to go with a tape gasket or high-temp silicone to seal it up. I'm confident that the Permatex Red RTV is fine for the smoker box, but not sure about the fire...
I've heard of using this stuff to seal the gaps on smokers and it's been suggested that it's ok to use the Ultra Copper on the smoker box as the temps don't get excessively high. Here's some info that was provided by Permatex on that subject,
..."Permatex has a High Temp. RED RTV Silicone...
Hey, Gary! I figured I would try a picnic shoulder or maybe a boston butt. I'm familiar with both cuts and both have plenty of fat so they're less likely to dry out or burn if the heat soars on me. Regardless, I'm going to keep a hawk eye on that temp guage!
Tom
Would like your opinions. Would you reccommend tuner plates, ceramic tiles, solid full-length
plate with varying size holes? What would be the benifit/downside to each?
What width would I cut them to allow sufficient clearance underneath?
Thanks.
I've been using my broken down former gas grill to smoke things for the past 4 years or so and it was less than sufficient. My daughter and son-in-law just got me a new Oklahoma Joe's Highland Offset Smoker for father's day and I was JACKED!. It's the type of rig I've always wanted. Not too...