Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Recent content by hailfixer
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I got it on ebay, but that was a few years ago. Without the pilot light line you risk having a flame out with the gas still flowing.......... kaboom!
It may never happen but I wouldn't do this mod without it.
There must be many valves out there that would work, I just don't know where to...
I put the whole procedure in the Propane Smoker Modifications sticky thread.
Lots of pictures etc. Start on page 4.
Next mod I think will be an oven light or two. Then I have some ideas for latter this year. After the hail season.
Michael
A little update on the glass door mod.
After using the GOSM with the new window the past several weeks I am super pleased with it. However, I would change one thing. I would make the opening even larger. I had a concern that the door might be weaker or unstable with this large of an opening...
Good job your smoker looks great. The window looks real good. If I had to do it all over again I would put the window a little higher like yours and make it longer.
I installed the SFB in March of 2005, but I had the info over on the Smokeymountain forums until recently when I posted here...
I've added some photos of the Oven Thermostat mod.
Here is a copy of a post from the smokey mountain forum where I got the idea. I have added some comments in parentheses.
All of this came from a member there Ron Olson http://groups.yahoo.com/group/smokey...n/message/3360...
Thank you all the compliments.
I posted a brief description of the build in the Propane Smoker Modifications section (page 4),
and there is a new post with the build list & pictures.
Basically I ordered a piece of tempered glass from a local glass company. Took some 1/8" thick by 2" wide steel...
Here's a build list and photos for the glass door mod.
I used
1/8" x 2" steel plate 2 pieces 24" & 2 pieces10"
A 22" x 11.5" piece of tempered glass
Rutland #76 500° RTV High Heat Silicone
Nuts & bolts (I just used what I had on hand)
The sizes I used allow for the glass to have a 3/4"...
In case any are interested here is a few pictures of my GOSM with the glass door. I have posted in the Mod section about the smoker.
Yesterday I took it out for a ride. Here are the results of my 1st smoke with the new glass door. I really like seeing inside the smoker while it's working. The...
Yesterday I took the newly modified GOSM out for a ride. Here are the results of my 1st smoke with the new glass door. I really like seeing inside the smoker while it's working. The glass does get a film on it while its smoking, but it not enough to block the view. Here is a picture taken after...
I cleaned it up for the photos. Just soaked them in the sink and used that yellow/green sponge thingy and a lot of scrubbing.
I keep another thermometer on the shelf in the middle, and just guess from there.
The glass doesn't affect the temps as far as I'm concerned. It is a hair thicker than...
All you need is a yahoo email, no 'program' to sign up for that I know of. There are quite a few photo's there. It would be worth your time to look at them, I will try to get them up to Photobucket sometime but right now they are there for the viewing.
For any of you with vertical smokers you may like some of the mods I've done to my Great Outdoors Smokey Mountain smoker with a 16" door.
First was the addition of a Side Fire Box from Char-Griller. I made a template of the opening and used that to trace it on the smoker. I used the circular...
Just finished reading that. I started with the faq, but it has no info on how to upload pictures to speak of.
Ok here goes
Hope it works
Another Michael smoking in FLA (Tampa area - NPR)