Recent content by garretthall29

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    I am getting ready to start cutting my plate for the firebox and the dimensions I come up with off of the Feldon calculator seems on the big side. 27x27x28. Any suggestions?
  2. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    I hope you don't mind if I pick your brain Dave!  Should I use 1/4" for the RF plate? Also, my RF plate will be 13" from the bottom of the tank so does that mean it needs to have a 13" space at the end of it? I wasn't sure if thats what you were saying in your ealier reply.
  3. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    Would you recommend a thermometer at the top grate and one at the lower?
  4. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    Dave, do you mean if there is 13" from the bottom of the chamber to RF plate that I need to leave that same distance at the end of the plate? That's interesting idea for redirecting. Are guys/gals having problems getting enough heat to the lower rack with the RF design?
  5. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    My end result will look something similar to this picture below I found on google, only mounted on a trailer. In the original pics if you can see the blue chalk line below where the door cut outs are, that's where I planned to have the RF plate with the opening into the firebox 2 inches below...
  6. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    Anyone have any advice???
  7. garretthall29

    275 Gallon Fuel Oil Tank Build

    What thickness are you using for your RF plate?
  8. My first build! 275gal Oil Tank Reverse Flow

    My first build! 275gal Oil Tank Reverse Flow

  9. garretthall29

    My first build! 275gal Oil Tank Reverse Flow

    I have finally started my first build. I wanted to put up some pics of the start of the process, but I also have a couple questions. How far above the firebox opening should I put the RF plate? What thickness of steel is recommended for said plate? Also how far above the plate should my bottom...
  10. photo 1 (3).JPG

    photo 1 (3).JPG

    • garretthall29
    • Media item
    • Comments: 0
    • Album: My first build! 275gal Oil Tank Reverse Flow
  11. photo 2 (3).JPG

    photo 2 (3).JPG

    • garretthall29
    • Media item
    • Comments: 0
    • Album: My first build! 275gal Oil Tank Reverse Flow
  12. garretthall29

    First chuckie question

    thanks for the feedback everyone.... I'll be taking pics tonight and all day tomorrow..and will be post my first Qview!
  13. garretthall29

    First chuckie question

    Im not necessarily concerned about the total weight.I just didn't think it would turn out right. I couldnt imagine if a "butt" was only a couple inches thick, regardless of the weight, that it would turn out as awesome as a normal one.
  14. garretthall29

    First chuckie question

    Im gonna do my first chuckie tomorrow along with some other things. I was at the grocery this morning and took a look at the chuck roasts they had and they all were 2-3lbs and only 2-3 inches thick. Am I wrong in assuming that I need something bigger than this?
  15. garretthall29

    How long for a pork butt to thaw?

    it has usually taken 3 days in the fridge for me
See more
Top Bottom
Back
Clicky