how many butts fit in a MES40

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
I imagine you could fit 8 in there, but I would not do that. I never use the bottom rack, because I don't like it being that close to the heat. And any more than two per rack could cut the air circulation down. So I imagine 6 Butts (8 pounds each) is feasible.

Bear
 
back when i used my MES40 i averaged about 12 hours for a 8lb butt, should I estimate 13 hours for the eight 8lb butts?
 
 
  The time will still be decided by the largest butt. The beginning temp will drop more and take longer to recover from so much cold meat being added. Last time I did 8 butts in a MES 40, the one on the bottom right was more crispy on the outside from being so close to the heating element.

   Mike
 
I imagine you could fit 8 in there, but I would not do that. I never use the bottom rack, because I don't like it being that close to the heat. And any more than two per rack could cut the air circulation down. So I imagine 6 Butts (8 pounds each) is feasible.

Bear
I agree !

 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky