mes doesn't brown the meat what can i do

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

smokinnoosh

Newbie
Original poster
Apr 23, 2013
2
10
i've done ribs brisket shoulder etc but can't get that dark outside you get with wood burning smokers any suggestions
 
i've done ribs brisket shoulder etc but can't get that dark outside you get with wood burning smokers any suggestions
Scientifically an electric cooker won't give you the dark bark that combustion type of smokers will give.... there's always drawbacks w/ convenience.  
 
Last edited:
What temp are you using and what Rub? I have had a MES for a year and a half and get very Dark Killer Bark on Pork Butts and Briskets. The only down side is Poultry has to be finished in an Oven or Grill to get Crisp Skin...JJ

I would not want any darker than this!

 
Scientifically an electric cooker won't give you the dark bark that combustion type of smokers will give.... there's always drawbacks w/ convenience.  
Have to somewhat disagree here...The Electric Smokers won't give the Smoke Ring you get with Wood or Charcoal and there is a different Flavor...BUT...Bark is a function of Heat and Time creating a Protein conversion called the Maillard Reaction and depending on smoker temps the Caramelization of Sugars in the Rub. You get plenty of Dark Brown Bark on a Roast Beef that spent a couple hours in a 350*F Electric Oven or an Electric Smoker. The Reverse seared Rib Roast was smoked then finished in the Oven and other stuff below has Great Bark all courtesy of the MES...JJ


Another Butt in the MES...


Pastrami...


A Smoked Fattie...

 
Last edited:
Have to somewhat disagree here...The Electric Smokers won't give the Smoke Ring you get with Wood or Charcoal and there is a different Flavor...BUT...Bark is a function of Heat and Time creating a Protein conversion called the Maillard Reaction and depending on smoker temps the Caramelization of Sugars in the Rub. You get plenty of Dark Brown Bark on a Roast Beef that spent a couple hours in a 350*F Electric Oven or an Electric Smoker. The Reverse seared Rib Roast was smoked then finished in the Oven and other stuff below has Great Bark all courtesy of the MES...JJ


Another Butt in the MES...


Pastrami...


A Smoked Fattie...

I hear ya Jimmy but i'm talking if you cook identical cuts of meat cooked the same temp (one in electric and  the other from wood) the meat from the stick burner or  charcoal will be noticeably darker.  That's what i meant by it's science because  "combustion cookers put out all the different gases  that electric can't do....hence the different flavors
 
Last edited by a moderator:
I agree with chef jimmyj i have a mes30 and turned out some excellent PP but no smoke ring I also cook with a dry chamber (no water in the pan) and it produces a great bark
 
  • Like
Reactions: byronwahl
I'm certain there are major differences when using a stick/charcoal/propane vs electric. I have an MES40 (old gen) and like JJ, I've had no problems with bark. Have you checked the cabinet temp with a good thermometer. Maybe you are cooking at a lower temp than what you have it set for. Mine runs any where from 8-20 degrees cooler than what I would normally set it for. Also I believe whether your rub has some type of sugar in it will attribute to the bark.


Brisket


Pork Butt
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky