How do I go about removing the "COLDSPOT" from my fridge door to clean it up and tape it for repainting?
Removing Nameplate from Fridge Door
- Thread starter bsimm78
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Would love to but don't have a picture. It's a 1950's model. It isn't welded and there are no holes for bolts or pins. I'm guessing maybe glued on but not sure and don't want to try and pry it off til i'm sure.
papa chops
Smoke Blower
On my coldspot I removed the putty ad there was little clips I carefully spun back and forth off of the pins. I took some steel wool and cleaned up the badge then painted inside the letters with an oil base gloss black it turned out pretty nice
papa chops
Smoke Blower
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
Spammer PMs, Anybody Else?
- Started by chilerelleno
- Replies: 64
- Blowing Smoke Around the Smoker.
-
Questions for RecTeq owners
- Started by schlotz
- Replies: 62
- Blowing Smoke Around the Smoker.
-
Lost my dad yesterday
- Started by normanaj
- Replies: 35
- Blowing Smoke Around the Smoker.
-
On the Edge of Trying Sausage Making
- Started by BrianGSDTexoma
- Replies: 33
- Sausage
