The New Lang 36 Hybrid with Warmer and Chargriller Arrived!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

whittling chip

Meat Mopper
Original poster
SMF Premier Member
Sep 18, 2011
297
15
Largo, FL
I received the new smoker today!

143c1176_Smokerarrival037.jpg


The seasoning begins.

f51d1542_Langstartup003.jpg


This is the thermometer on the chargriller....that'll cook a steak!

82376efa_Langstartup007.jpg


This is the smoker side. I'll keep the temp up for an hour and then spray the inside with water to make a steam bath.

a771d11a_Langstartup008.jpg


Steam on!

ba161859_Langstartup011.jpg


That is steam comming out of the warmer box. It nearly knocked me down!

e45de690_Langstartup012.jpg


A big thanks to Ben Lang and all his employees. They really came through for me. Tomorrow my wife and I are celebrating our 30th anniversary. Ben had a guy jump in a truck and drive it to me from Georgia just so I could have it by today.

One last thing. This thing is BEEFY! It's made entirely of 1/4" steel. It is a superior quality made item. Best of all, it's made in America!

Thanks for looking,

WC
 
Last edited:
Glad to see the pics! I'm on vacation and have to wait until I'm back in Arizona before I can see mine!


BEAR DOWN!
 
Congrats on the 30th!!! Man that's a Nice Lang! You've gotta be STOKED!!!

I'm tween smokers and grills and cannot wait to get my new rig. I recently got rid of an old mobile-custom. In the interim, we have a little economical vertical charcoal smoker and a heavy custom grill we've had for years. After seeing your pics, I'm going to look in to the Langs while I'm shopping...

Have a good one...
 
Here's how it was deliverd:

4c3cbf1a_Smokerarrival003.jpg


It's good to know someone with a lift gate truck.

d406bdd2_Smokerarrival006.jpg


3593d57e_Smokerarrival009.jpg


We off loaded onto the liftgate then lowered it to the ground.

b4a010b0_Smokerarrival016.jpg


Then we had to go to the back yard...through the gate..... GO TEAM LANG!!!!!!!!!!!

4e94c1bc_Smokerarrival029.jpg


That's what I'm talkin' about.

fc878ac6_Smokerarrival035.jpg


Did I mention I'm SOOO Happy!

Chicken's on it right now. It was seasoned starting at 12:30, steam bathed and cleaned a couple times and the chicken went on.

Thanks for lookin'
WC
 
That thing looks awesome congrats again
thumb1.gif
 
WC, evening....  Is that a little smile I see ??...  Well I do believe so....  Congrats on the new smoker....  Many happy smokes....  
beercheer.gif
.....   Dave
 
Super cool man! I wish I got slide out racks on my 36, the legs of the 2nd shelf bug the heck out of me mostly, my personality, I thought I would be OK with them, but nope!

Congrats man!!!
 
Since you have already had the chance to use it, do you find the thermometers seem pretty accurate?
BEAR DOWN!
I was in such a rush to season the smoker, I completely forgot to check the calibration on the three thermo's. I plan on checking them today. I'll get back to you and post up.

You're going to love the char griller! It's built to hold some heat. I'll get pics of the inside today and post them so others can see how it's built.

WC
 
Looks awesome!!

  Congrats!!

       Craig
 
Guess I should show off the small amount of chicken I cooked. I used Jeff's rub and marinated overnight. It turned out great.

7a18d57b_6-2-2012009.jpg


2af1df1e_6-2-2012011.jpg


I can't wait to load this puppy up!
WC
 
WC, morning and nice job on the chicken......  It looks like you have the new smoker figured out pretty good....    Dave
 
Dang Chip-that is a sweet unit. I saw the 36 hybrid that Ben posted to FaceBook and even though I'm happy with my 60 I was wishing big time for a 36 hybrid!

So how accurate are the stock thermos?
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky