adding additional charcoal, lit or unlit?

I always add unlit. How much depends on your rig. What do you have?

I alway's go with lit charcoal otherwise I can taste the charcoal

LOL... now to really confuse you.... I add mine half lit. To avoid the ignition smoke you get from charcoal, I find if you fill a chimney, light it and let it get about half lit, then all the nasty smoke has finished before you put it in the smoker.

JIRodriguez said:

LOL... now to really confuse you.... I add mine half lit. To avoid the ignition smoke you get from charcoal, I find if you fill a chimney, light it and let it get about half lit, then all the nasty smoke has finished before you put it in the smoker.

Click to expand...

Second this option.... do the same, lit, 1/2 ready, insert to smoker fire box.

SmokinAl said:

I always add unlit. This brings up a question. If you say there is a charcoal flavor you don't like when adding unlit, how does this differ from the minnion method? With the minnion method your essentially always adding unlit charcoal to the fire.

Click to expand...

I usually have my smoker running for approx 20-30 minutes before meat goes on. My thought is that even though a lot of charcoal has not lit it has gotten physically hot, and that heat helps to drive out anything that is going to off-gas a large amount of white billowy smoke. Which is why I half light my chimneys, just enough to get everything hot before it goes in with the meat....... Course I may be completely wrong in my assumptions, wouldn't be the first time.... just ask my wife!

If you're adding hardwood lump charcoal, you can add it right in without pre-burning.

If you're using briquets, uhh.... get rid of thew briquets, go get a couple bags of hardwood lump, and follow the previous instruction. You can't add briquets without a pre-burn, and by that time you've wasted 30% of the available energy AND left yourself with a clay mess in the bottom of your firebox!

Personally, my last many smokes have started with a full chimney of hardwood lump, poured over a basket of lump. When that starts needing new fuel, I toss in split logs of whatever hardwood I have around. Oak, maple, cherry, apple, pecan... it's all good. And the product comes out great. Even on the Weber kettle I've gone to logs for additional fuel, i handles them just fine.

Why not just add more wood chunks and not worry about it. lol

Uh, am I the only one that's getting confused?  Maybe it's just my meds.  Got some new ones to play with the old ones....

The following is given:

1.  There is the Lump only and forever camp

2.  There is the Briquette only and forever camp

3.  There is those of us who are trying to wade through all the propaganda and favoritism to find a happy medium.
 

I think I've just gotten a successful run of a modified minion method (ring around the outside)(Stubbs hardwood Briquettes) with a fair temp hold (about 245, top grid, 215, bottom grid, 205, above charcoal grate), although certainly not any 10 hours like some I hear about on this site, but still 6 is a good start.  Remember, this isn't a WSM but a Smoke EZ on a Weber 22.5 OTG.   I've got lump available (I don't know why but some people, SWMBO for one, call me a hoarder ) so my next training run will be with lump exclusive and subsequent runs will probably be mixed.  Hey, I'm expanding my horizons, what can I say?  When you're newly retired, you get to do things like this.........Gives you something to look forward to, doesn't it? 

So, where were we?  Oh yeah, adding additional fuel.  If I prefire the briq or lump, aren't I going to get a temp jump? (sorry for the poor english, I hear Mary Bond Lash (High School English Comp, centuries ago) coming after me right now with ruler) Or is this just a temporary thing that will even out in the long run, over the hours of the smoke, averaging in the temp drop you'll experience while adding the fuel to the chamber?

See my quandry?  So far I figure I'm good for the 6 hours (knock on wood) but if I'm looking at, oh let's say, a briskie........  in a stall......  now that might be the time to add the additional fuel, right? 

Or...........

LOL... yeah Dave we are picking at nits here.  (don't ask me what a nit is... haven't a clue, lol)

You are correct in that if you add partially lit or fully lit you get a temp spike, but if your smoker is sealed well enough you can controll it. On my WSM I close off all my intake vents and the spike lasts for about 10 minutes, then it settles down.

The main thing we are talking about avoiding is the initial ignition smoke you get from charcoal, it is worse with briquets than it is with lump. It is not creasote, but it also isn't the most plesent tasting thing to add to your meat either. If for some reason I have to add charcoal mid smoke (a very rare occurance with the WSM), my preferred method is to half light a chimney, that seems to reduce the ignition smoke significantly, but not cause a giant temp spike. About the only times I have to add mid-smoke is in the winter when it is cold and windy, if I have temps above 65° and minimal wind then I can run 20+ hrs. on a 20 lb. load of charcoal.

I want some of what NW Dave has. I have to agree with Al and the minnon way of thinking.

SmokinAl said:

I always add unlit. This brings up a question. If you say there is a charcoal flavor you don't like when adding unlit, how does this differ from the minnion method? With the minnion method your essentially always adding unlit charcoal to the fire.

Click to expand...

I know this is an old thread, but curious if folks have updates or new comments on this question?