I Failed the Smokenator Test

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

vision

Smoke Blower
Original poster
Apr 29, 2011
131
11
Baltimore, Maryland
Well this morning I enthusiastically followed the directions for a test run on a Smokenator in a Weber Gold and...nothing worked correctly. Specifically the temperature was not measured correctly and the charcoal burned way too fast.

Per the instructions of a test run I closed the bottom vents half way, opened the top vents to 3/16 put 40 coals in the smokenator, used 12 coals to start it, and added water. I put the thermometer with 2.75" from the tip to the clip in the dome and awaited things to act according to the instructions.

At 11:26am the lid was closed and we're off.

At 11:36 the dome thermometer read 225f and for a moment it looked like all was well.

At 11:51 dome temp was 350 and rising...at which point I closed the bottom vents to 5/16 to keep the temperature down and then I noticed the top vents for some reason were more 3/8 than 3/16 so I closed them to 3/16 again.

At 12:47 the dome temp was still a little over 350f. Suspicious, I put a polder thermometer through two radishes on the cooking grate and the temp was 247f. That's interesting!

At 2pm almost all charcoal had been burned and temp on the grate was 217f.

So did I do something very wrong in measuring the dome temperature? The instructions say there should only be a 20 degree difference between the dome and grate temp. Why did the charcoal burn so quickly? From the instructions the cook should have lasted 5 hours and this lasted  2 1/2 hours.

The only good news is maybe the temps were 225-250 on the cooking grate.

Another question, is it ok for there to be a small gap between the kettle wall and the rounded top of the smokenator?
 
Last edited:
Have not seen one in action but basically what I see is an insert that fits into a kettle to try and turn it into a smoker.  I dont have the specifics on how to make it work but it appears that they think thru adjusting the dampers you can control the heet which seems reasonable. I think you may just have to play with your kettle to see how to maintain a constant temp. My biggest question is mow did it smoke ? Were you able to maintain TBS?
 
I'm thinking too much air was in the kettle. Will need another test run dangit.
 
I think you may just have to play with your kettle to see how to maintain a constant temp. My biggest question is mow did it smoke ? Were you able to maintain TBS?
Not sure what you mean by TBS. It smoked fine.
 
 
I LOVE THIS PIC!!!

Test:

Which smoker is producing the better smoke?

df262b9a_TBSPic.jpg
 
Last edited:
I agree, it was that and also not putting all the starter coals in the center hole- which lit the other coals too soon.
 
Ok, what does TBS mean?

I don't put the wood on top of the coals? I did this over the weekend and it did catch fire.
 
I have a Smokenator and LOVE it! My 1st question is did you follow the directions for lighting the charcoal? If so, I wonder if your lid is warped. I got mine for Christmas and have used it numerous times now. It works great. I actually deviate a bit from directions now. I use the water pan for wood pellets and cover it with foil, poke a few holes in it to allow smoke to escape but not too many to allow the pellets to burn. I then place a pan of water on the charcoal grate - seems to work fine.
 
52eaf849_IMG_0248400x300.jpg


I disregard dome temps when using the smokenator.  I simply use the grate level temp. 

You may have to much air. At first, I used binder clips to seal the lid onto the kettle a bit better.  But after a few cooks enough "good stuff" built up so I don't bother with them any more.  It seals fine now. 

I use the smokenator for short cooks (6 hrs or less) on smaller pieces of meat.  Although I've always had fuel remaining and could go maybe an hour longer if needed. 

Also, I use a pitmater iQ110 auto temp controller with my keetle.  I rarely like to fiddle with adding water so I usually put a roasting pan of water under the meat I am cooking. 
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky