Advice on best way to go with this barrel

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

scholl

Newbie
Original poster
Sep 25, 2015
3
10
I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW 

I have a barrel and to make another. The inside does not look the same as the one before.Take a look at the lid and tell me the best way to get this copper colored coating off. I scratched it so you can see the bare metal. It's won't wipe off. Thanks
 
Hello.  Welcome.  I see this is your first post.  Please take some time and swing over to Roll Call and introduce yourself so that we may give you a proper "Hello".  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  As for your question: you have the answer.  "I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW".  Have fun.  Good luck.  
icon_biggrin.gif


Glad to have you with us.  Keep Smokin!

Danny
 
 
Hello.  Welcome.  I see this is your first post.  Please take some time and swing over to Roll Call and introduce yourself so that we may give you a proper "Hello".  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  As for your question: you have the answer.  "I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW".  Have fun.  Good luck.  
icon_biggrin.gif


Glad to have you with us.  Keep Smokin!

Danny
OK Danny, Thanks. I updated my profile and added a sig. I 've been a member since 15 and today was first post.

I think it's some kind of rust inhibitor inside the barrel. My first UDS had a liner and I worked to hard to remove it. I was hoping for an easier way.
 
I discovered it's rust inhibitor. I will still have to get rid if it. I am going to wire brush and machine sand the paint outside and inhibitor inside. I burned the first out and worked harder getting the black mess off. Thanks for the help.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky