Buckboard Bacon (Step by Step)

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Bearcarver

Gone but not forgotten RIP
Original poster
OTBS Member
Group Lead
Sep 12, 2009
45,279
18,182
Macungie, PA
Buckboard Bacon (Step by Step)


NOTE: The following is how I do this particular Smoke. You can do it this way, or many other ways.
I'm posting this in Step by Step form in case anyone would like to follow it.


I got a pretty good score about two weeks ago!!!
Lowest price for Pork Butts I've seen for a couple years!!!
On Sale at Redner’s Market for $1.68 per pound!!!!
Then since it was Veteran’s Day I got another 10% off everything.
So I got 2 Small Boston Butts (5+ lbs each), 2 Whole Pork Loins ($1.88), and some Ground Beef (80-20) for $1.98.

Prepping (Day #1):
So I started by De-boning the Butts. I never had trouble de-boning a Butt before, but since my Open-Heart Fiasco, my hands were shaking so much I was lucky I didn’t lose a finger while doing that first Butt. So I decided to leave the bone in the second Butt.
Then I Weighed the pieces to be cured.
Then Weigh proper amount of Tender Quick for each piece (1/2 ounce---One TBS per pound).
Rub TQ on first, trying to get it distributed evenly all over the piece of meat it was measured for.
Rub on about 2 tsp of Brown Sugar per pound of meat, and put the piece of meat in the bag.
Note:  We fold the top of the bag over, like a pants cuff, so no salt or sugar grains get in the zipper parts.
Any cure that falls off before getting into the bag, I pick up & put in the bag, with the piece of meat it was designated to be with. That will ensure that the proper amount of cure will be with each piece of meat during the curing stage.

Calculating curing time:
The method I use for calculating curing time is simple. I learned it 6 years ago on SMF, and it has never failed me. The cure has always gotten to the center of all pieces, and I have never had any that were salty. Those are the 2 Important things!!
Measure the thickest spot of all of the pieces of meat you plan to cure.
Figure how many "half inches" there are in that measurement.
Add 2 to that number. That will be the minimum time that I would cure that piece of meat.
Then I personally like to add 2 or 3 more days to be extra safe (you can't over-cure, but you can under-cure).
Example:
My thickest piece was 2 1/2 inches. There are 5 "Half inches" in 2 1/2".
So that would be 5 Days plus 2 days = 7 days absolute minimum curing time.
Then due to the fact that I wanted to smoke the meat on Monday, I added 3 more days to that number.
So I cured these pieces of Pork Butt for 10 days in my Meat fridge, at 37°.

Day #10:
Rinse all the pieces off, and soaked them in cold water for about 15 minutes to remove surface salt.
I cut a slice from the middle of the Thickest piece, and checked the color inside to be sure it was cured to the center.
Then I did a Fry-Test to make sure it wasn't too salty. It was perfect.
So I rinsed the pieces all off again, and patted them dry with a lot of paper towels (Mrs Bear says I should buy a paper towel company!!)
Then (experimenting) I skipped sprinkling the CBP, Garlic Powder, and Onion Powder, and put the pieces on the Grill racks, without touching each other.
I put these pieces in my Kitchen Fridge for the night.
I can no longer carry a rack full of meat down the steps, so I will put it in my smoker for an hour or two at about 150˚, before adding the smoke, to get my pellicle. 

Day #11 (Smoking Day---Using MES 40 BT):
7:00 AM-------------------------Pre-Heat Smoker to 150˚.
7:30 AM-------------------------Put loaded rack on 2nd position of my 6 position smoker, with top exhaust vent open fully.
8:00 AM————————-Fill 2 rows of AMNS with Hickory Dust & light one end.
9:30 AM————————-Internal Temp at 101°——Put Smoking AMNS on bottom rack, on left side.
1:00 PM-------------------------Bump heat to 170˚ (Internal Temps were at about 130° at this time).
2:00 PM————————-Add Apple Dust to half of last row of AMNS to complete smoke.
3:00 PM————————-Bump Heat to 180° (IT was at 140°)
4:00 PM—————-———Check each piece, and remove as all were between 146° and 153° internal temp.

Allow to cool to about 100˚ before wrapping in plastic wrap, and putting in fridge for R & R.
Leave in Fridge over 2 nights for best flavor.
Put in freezer for 3 to 4 hours before slicing makes the slicing work much better.
I sliced this batch, and vacuum packed in small amounts, because I only eat a little at a time nowadays, so each pack is enough to go with about 4 or 5 days with my Breakfast Eggs.

Note: I actually used Dry Maple Sugar (Equal amount as the TQ) on one of the pieces, instead of Brown Sugar, and I could not taste a difference.


That's all I can think of right now----Enjoy the Views!!

Bear





Two Small Boston Butts (5 Pounds each)
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2034.jpg.html




Butt pieces before curing:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2054.jpg.html




Small Center slice shows cured to center & fry test showed Zero Salt flavor:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2056.jpg.html




MMMMM—Test piece tastes Great—All it needs is Smoke!!:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2057.jpg.html




Ready for Smoker:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2068.jpg.html




No more leaves on Trees!!
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2070.jpg.html




Two rows of Hickory Dust in my AMNS lit & ready to go:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2074.jpg.html




Tape doesn’t stick to my new MES 40, so I’m using clothes pins on cables to hold Maverick probes in place:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2075.jpg.html




Buckboard Bacon pieces ready for slicing:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2083.jpg.html




Slicing BBB:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2087.jpg.html




All done slicing. Bacon ends in small bowl on left (A favorite around here):
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2085.jpg.html




Closer look at Sliced BBB:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2088.jpg.html




BBB all wrapped for freezing:
http://s836.photobucket.com/user/Bearcarver_2009/media/DSCN2096.jpg.html
 
Nice job Bear, as usual, Looks fantastic, That ought to last you a little while 
Looks-Great.gif


points1.png


Gary
 
Bear That looks great,thanks for the step by step.I need to pick up a butt. I know I did it with a shoulder not the same.Thanks

Richie

points.gif
 
Looks great Bear.


I am closer to you than Crankybuzzard. I can to the taste testing
 
 
Nice job Bear, as usual, Looks fantastic, That ought to last you a little while 
Looks-Great.gif


points1.png


Gary
Thank You Gary!!

Yup--Nowadays that will last me a long time----10 times as long as it used to!!
icon_rolleyes.gif


And Thanks for the Point, Gary !!

Bear
 
 
Bear That looks great,thanks for the step by step.I need to pick up a butt. I know I did it with a shoulder not the same.Thanks

Richie

points.gif
Thanks Richie!!

Bear
Bear, another excellent step by step! If you need a field tester, I can PM my address!

points.gif
Thank You CB !!

And Thanks for the Point !!

Bear
 
Tasty BBB! Nice smoke Bear! Think I'll grab a pack out of the freezer to go with some Hawaiian French toast!

POINTS!!!!
 
Last edited:
Looks great Bear.


I am closer to you than Crankybuzzard. I can to the taste testing
Thank You Adam!!

LOL---I'm pretty sure you know exactly what this tastes like.

And Thanks for the Point !!

Bear
 
Hey Bear, very nice SBS thread as per usual... Thumbs Up Another great SBS to some good BBB ! Nice job !

:points1:
 
Last edited:
don't know what is wrong but the sight wouldn't allow me to post a point sorry. Hey Bear when I did the Canadian bacon I used a kitchen type salt shaker with the proper amount of TQ in it for each piece of meat and it worked grate getting good coverage on the hold piece of meat.
 
Tasty BBB! Nice smoke Bear! Think I'll grab a pack out of the freezer to go with some Hawaiian French toast!

POINTS!!!!
Thanks Case!!

Hawaiian French Toast sounds Awesome!!

And Thanks for the Point !!

Bear
Hey Bear, very nice SBS thread as per usual...
icon14.gif
Another great SBS to some good BBB ! Nice job !

points1.png
Thank You Justin!!

And Thanks for the Point too!!

Bear
 
don't know what is wrong but the sight wouldn't allow me to post a point sorry. Hey Bear when I did the Canadian bacon I used a kitchen type salt shaker with the proper amount of TQ in it for each piece of meat and it worked grate getting good coverage on the hold piece of meat.
Thanks anyway, Buddy!!

That's a great idea if you're only doing a piece or two---I like it !!

However if you're doing a bunch of pieces, you'd be filling the shaker all the time.

I usually just spill the TQ from the paper plate I measured it in---Half on each side. Then grab Brown sugar from a bowl & throw it on. Then rub it & bag it.

I do this all on a dish, so I can wipe up the cure that fell off & throw that in each bag too with the piece it fell off of.

Bear
 
don't know what is wrong but the sight wouldn't allow me to post a point sorry. Hey Bear when I did the Canadian bacon I used a kitchen type salt shaker with the proper amount of TQ in it for each piece of meat and it worked grate getting good coverage on the hold piece of meat.
I see you figured it out.

Thanks for the Point !!

Bear
 
Another great step-by-step, Bear!!

I see you haven't given up the quest for that maple bacon...
biggrin.gif


For applying the TQ, I like to do it with the piece inside that bag. I always seem to make a mess any other way and this makes sure it all gets in there.

points.gif
 
 
Another great step-by-step, Bear!!

I see you haven't given up the quest for that maple bacon...
biggrin.gif


For applying the TQ, I like to do it with the piece inside that bag. I always seem to make a mess any other way and this makes sure it all gets in there.

points.gif
Thanks Duke!!

I thought about that, but this way I get Mrs Bear to help.

She opens the bags up & folds the tops into a cuff.

Then I slide the meat in (Don't laugh!!), and throw in the rest of the TQ that fell off.

Then we move on to the next bag.

When they're all done I wash my hands & close them all up.

This way I never have to touch the outsides of the bags with sticky hands, and she doesn't get any on her hands.

Then she cleans the counter tops & everything else off.

We've been a team for almost 47 years (next month). Works pretty good.
icon14.gif


Bear
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky