Mini-mod Monday!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

dirtsailor2003

Epic Pitmaster
Original poster
OTBS Member
Oct 4, 2012
21,947
4,224
Bend Oregon
Been a while since I've made a mid that required an actual tool. A while back I ordered several of part number 85037 from eReplacementParts.com. One for each mini pot and one for the new WSM. Installed the ones in the mini today. Wish these had been around years ago.

In order to install these you will need a 1 1/4" drill bit, I used a hole saw. Started in side then came in from the other to finish the cut. Had a small burr to sand/file (couldn't get to my file, garage needs a spring cleaning!).

a22ef41ca372492a084472dadba246f6.jpg


65b3423be411e001f9ef66c87a04512e.jpg


d34b312710c88215f66d5fa81b9cbfb7.jpg


05c90309fa060a90284d4cbbf1bbe926.jpg


bed67a83b06226961e91e151ded41772.jpg


7e0bf8b7a9168bd035a17311065c026e.jpg





Smoke away!!!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky