Toggle sidebar

Grizzly 5 lb stuffer

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Remove the Ads for LIFE - 50% Off!
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
I think you need to measure the back of your existing tubes where they sit against the stuffing canister. Match something up from one of the supply companies by using that measurement, maybe its a standard size ????
 
rgautheir20420 said:
So I've got this stuffer.

https://www.grizzly.com/products/H6252

I've recently bought 19mm collagen casings and I don't think my smallest tube size (5/8") is going to do the job. Does anyone know of a tube size that will fit my stuffer and work on the casings for snack stix? Please provide a link. Thanks!
Click to expand...


If you have a flaring tool, or access to one, you can make your own tube.... I have..... Flare the end and heat the end to anneal the metal... You can add a washer to increase the diameter of the end or just slide the tube down an existing tube.... I used 1/2" because it fit the flaring tool... with the thin wall, it works very well.... make extras for friends...


http://www.harborfreight.com/7-piece-tube-flaring-kit-5969.html

http://www.grainger.com/product/Tub...m/rp/s/is/image/Grainger/4EEF9_AS01?$smthumb$

I made one out of copper also....

.....click on pic to enlarge....
73e13295_tube3.jpg

73e13295_tube3.jpg

d6b00afe_tube5.jpg

d6b00afe_tube5.jpg

 
Last edited:
You can get a smaller tube from LEM or Sausage Maker....1/2 inch O.D....3/8 inch I.D.

In fact, I have an extra LEM tube...brand spanking new...$15.00 via PayPal and it's yours......it'll definitely fit the Grizzly 5lber.


I bought one of the little LEM tubes for snack sticks when I had a Grizzly 5 lb. stuffer...I sold the Grizzly (which was a mistake) and bought a LEM 5 lber. ....that came with the stainless tubes....giving me two tubes and I only need one.






=Martin=
 
DiggingDogFarm said:
You can get a smaller tube from LEM or Sausage Maker....1/2 inch O.D....3/8 inch I.D.

In fact, I have an extra LEM tube...brand spanking new...$15.00 via PayPal and it's yours......it'll definitely fit the Grizzly 5lber.


I bought one of the little LEM tubes for snack sticks when I had a Grizzly 5 lb. stuffer...I sold the Grizzly (which was a mistake) and bought a LEM 5 lber. ....that came with the stainless tubes....giving me two tubes and I only need one.






=Martin=
Click to expand...
Martin do you have a link to the tube you've got? Sounds like it might do the job then. Send me your info and I'm in!
 
You must log in or register to reply here.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Similar threads

broozer
1st snack stick questions, Bronco smoker
Replies
13
Views
1K
Sausage
broozer
broozer
davidbondy
Kitchener Elite Super Heavy Duty Commercial 5LB Sausage Stuffer Horns (Tubes)
Replies
3
Views
592
Slicers, Grinders, Tools, Equipment
davidbondy
davidbondy
PapaRed
Snack Stick Issues
Replies
12
Views
1K
Sausage
PapaRed
PapaRed
broozer
Stuffer info
Replies
2
Views
369
General Discussion
Brokenhandle
Brokenhandle
bill ace 350
LEM Stuffer for snack sticks
Replies
7
Views
2K
Slicers, Grinders, Tools, Equipment
bill ace 350
bill ace 350
crazymoon
Pepperoni snack sticks with pepper jack cheese
Replies
19
Views
2K
Sausage
hondabbq
hondabbq
Hijack73
Sausage stuffing - or how I got mad and threw a bunch of junk away.....
Replies
76
Views
4K
Slicers, Grinders, Tools, Equipment
DougE
DougE
Gonna Smoke
Need Some Recommendations
Replies
30
Views
2K
Sausage
SmokinEdge
SmokinEdge

Latest posts

Hot Threads

Top Bottom
Back
Clicky