Can't keep the smoke going?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

finsfree

Smoke Blower
Original poster
Jun 6, 2013
138
39
I've got an Oaklahoma Joe offset smoker.

I was smoking a 14lb brisket the other day and i couldn't keep the smoke going. It only smoked for about the first 2hrs then stopped. I checked the wood in the firebox and it was still good (not all burnt up). I then replaced the old wood with new ones and no smoke.

What i think it might be is that for me to maintain 225 degree temp i need to totally close my intake vent. Even after i added a gasket kit to my smoker i still have to keep the intake closed (meaning i probably have leaks). But leaks or not i can't keep the smoke going.

I'm used a charcoal basket filled charcoal and added 1 year old chunks of Oak. Btw, i can get 7hrs of burn time with this charcoal basket...hehehe!

So, any thoughts???
 
Aside from the appearance of smoke, could you smell it? If the charcoal is still burning and the wood is still there, it sounds to me like you just have a fire that's burning well and not producing VISIBLE smoke. Are you getting smoke flavor? What happened to the chunks after the visible smoke stopped? Were they blackened, reduced to ashes or just sittin there smiling at you? (I mean after the cook was finished)
I'm no fire expert, but I believe what happens, especially with chunks, is as the moisture and impurities are burned off the visible smoke decreases until you've basically created a lump of carbon, which will still burn and produce good smoke flavor, just won't "smoke".
 
Aside from the appearance of smoke, could you smell it? If the charcoal is still burning and the wood is still there, it sounds to me like you just have a fire that's burning well and not producing VISIBLE smoke. Are you getting smoke flavor? What happened to the chunks after the visible smoke stopped? Were they blackened, reduced to ashes or just sittin there smiling at you? (I mean after the cook was finished)
I'm no fire expert, but I believe what happens, especially with chunks, is as the moisture and impurities are burned off the visible smoke decreases until you've basically created a lump of carbon, which will still burn and produce good smoke flavor, just won't "smoke".

If i were to get really, really, really close to the exhaust vent i could see faint smoke coming out, but for it to be ideal it would need to be heavier than that.

Yes, it had smoky taste, but the smoke ring wasn't very thick. The meat was great don't get me wrong I'm just trying to figure out why i had no smoke.
 
The hotter the water gets, the more steam it will produce..... Steam displaces air / oxygen in the smoker..... Puts out the fire......

Turn the smoker down to 205 degrees so you don't drive the moisture out of the ribs.....

Remove the water in the pan so the pellets will burn.....
 
Last edited:
I think you've achieved perfect smoke and might just not realize it. A smoke ring is a neat thing to talk about but isnt worth a hill of beans in the grand scheme of things. Different woods, temps, meats and humidity all affect the formation of a smoke ring. As the often misquoted old adage goes, "the proof of the pudding is in the tasting". If you're getting the flavor and tenderness you're looking for, you're there my friend.
Heavy smoke looks neat and makes you think you're doing something good, but in reality that's where te trouble starts. Bitter flavors and off colors are most often attributed to heavy smoke.
 
The hotter the water gets, the more steam it will produce..... Steam displaces air / oxygen in the smoker..... Puts out the fire......

Turn the smoker down to 205 degrees so you don't drive the moisture out of the ribs.....

Remove the water in the pan so the pellets will burn.....

Am I missing something here? What water? What pellets? I really don't mean to sound like a jerk I'm just not following.
 
I think you've achieved perfect smoke and might just not realize it. A smoke ring is a neat thing to talk about but isnt worth a hill of beans in the grand scheme of things. Different woods, temps, meats and humidity all affect the formation of a smoke ring. As the often misquoted old adage goes, "the proof of the pudding is in the tasting". If you're getting the flavor and tenderness you're looking for, you're there my friend.
Heavy smoke looks neat and makes you think you're doing something good, but in reality that's where te trouble starts. Bitter flavors and off colors are most often attributed to heavy smoke.

You may be right. The meat tasted great!

I'm using well seasoned wood. I've had this oak for about 1 1/2 years now. It burns clean.
 
Last edited:
when you got the fire right, there is not much smoke anyway. just a little blue smoke.
welcome1.gif
 
You are doing it right. You don't want a bunch of billowing white smoke. Once your smoker is up to temp and your fire is burning efficiently ( Charcoal nice and white good embers very little smoke) when you star adding seasoned wood that is over a year old you won't have much smoke, because of a couple of things the wood is dry and burns efficiently, green wood has a lot of moisture which causes steam, takes longer to burn and creates lots of creosote and a acrid taste on the meat. Also wood burns best (eliminating most of the bad tasting stuff stuff) between 650¤ and 750¤ That is the fire temp. So when you have everything working like it it supposed to you will have a thin blue smoke, sometimes very hard to see, That's what you are looking for. 

So if your happy with the amount of smoke on your meat I wouldn't change a thing.

Gary
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky