amnps in a master forge vertical smoker

beefy bill · Nov 19, 2014

Hey everyone. I am interested in the AMNPS. I have a master forge vertical smoker. There is a cylindrical cover over the burner with 3 slots that allows heat through the top, where the chip box sits, and slots around the sides. Can I sit the amnps in the same place as the chip box?

sqwib · Nov 19, 2014

You could put it on top of the chip box.

sqwib · Nov 19, 2014

I don't know why all my videos are playing, just stop it after the first video.

beefy bill · Nov 19, 2014

I'll have to check when I get home, but I think the water pan will be in the way.

beefy bill · Nov 19, 2014

The water pan is only 3 or 4 inches above where the chip box sits. With the chip box in place it won't fit. Can the amnps not be placed so close to the heat source?

cmayna · Nov 20, 2014

Is this a propane smoker?

beefy bill · Nov 20, 2014

cmayna said:
Is this a propane smoker?

yes it is. I've also discovered the amnts. If I use that on the grate, next to the meat, will that meat get smokey?

beefy bill · Nov 20, 2014

SQWIB said:
You could put it on top of the chip box.

SQUIB, what kind of smoker is that?

tjohnson · Nov 20, 2014

I would use the Tube Smoker in your propane smoker

Larger mass of pellets performs better in the low oxygen atmosphere of a propane smoker

The smoke circulates, so your meat shouldn't get too smokey

cmayna · Nov 20, 2014

beefy bill said:
yes it is. I've also discovered the amnts. If I use that on the grate, next to the meat, will that meat get smokey?

I have a masterbuilt gasser and have the amnps supported under the bottom of the smoker's burner. The heat draws the smoke of the amnps upward into the smoker.

beefy bill · Nov 20, 2014

Now that's an idea....I imagine I gotta get it pretty close depending on wind...I'm gonna go eye that up in a little while...

oldschoolbbq · Nov 21, 2014

This may help you...

http://www.smokingmeatforums.com/newsearch?search=Masterbuilt+Propane+Smokers&=Search

Have fun and . . .

cmayna · Nov 22, 2014

Here's a link to one of my threads using a amnps with my Masterbuilt propane smoker.

http://www.smokingmeatforums.com/t/157143/amnps-with-mr-gasser

beefy bill · Nov 22, 2014

That's slick. I gotta go see if I have the claearance. I looked for specs on the height of the amnps. I only find length and width. How tall is it?

cmayna · Nov 22, 2014

sqwib · Nov 23, 2014

beefy bill said:
SQUIB, what kind of smoker is that?

GOSM Big Block

amnps in a master forge vertical smoker

Meat Mopper

Smoking Guru

Smoking Guru

Meat Mopper

Meat Mopper

Master of the Pit

Meat Mopper

Meat Mopper

Smoking Guru

Master of the Pit

Meat Mopper

Legendary Pitmaster

Master of the Pit

Meat Mopper

Master of the Pit

Smoking Guru

Similar threads

Hot Threads