First time Bacon

h2so4ca

Meat Mopper

Original poster

Dec 15, 2013

174

127

Seattle WA

• Aug 11, 2014

• #1

So this is my first time making bacon. I picked up two 10 lb skinless pork bellies from Restaurant Depot.

IMG_1868.jpg

• h2so4ca
• Aug 11, 2014

They have been sitting in Pops Brine for the last week and will do one more week before I get ready to smoke them over hickory pellets 

for 12 to 24 hours.

My plan is to do these in my WSM by removing the water pan and just putting my AMPS in the bottom where I would normally put charcoal. I can fit a whole belly on each of the two racks. I did a test smoke yesterday and with just the AMPS smoking I could keep the 

temp in my WSM at 75 deg over night. During the day due to ambient temps it got up to 105 deg's . I have read that I can do a 12 hour smoke and then remove the bellies for a time to the refrigerator and then do a second 12 hour smoke. 

Does anyone see any problem with this plan? I have a week left of it sitting in the brine so I have time to make changes.

 

daveomak

SMF Hall of Fame Pitmaster

OTBS Member

★ Lifetime Premier ★

Nov 12, 2010

27,123

4,979

Omak,Washington,U.S.A.

• Aug 11, 2014

• #2

Should work.... Make sure you bring the belly temps up to ambient before putting back in the smoker..... Condensate will form on the cold meat... you want the meat dry when smoking....

Have you got room for a pop bottle, full of frozen water, in your smoker along with the meat.....

 

h2so4ca

Meat Mopper

Original poster

Thread starter

Dec 15, 2013

174

127

Seattle WA

• Aug 11, 2014

• #3

I should have plenty of room to put something full of ice in there. What temp would you recommend that I keep the smoker at? 

 

daveomak

SMF Hall of Fame Pitmaster

OTBS Member

★ Lifetime Premier ★

Nov 12, 2010

27,123

4,979

Omak,Washington,U.S.A.

• Aug 11, 2014

• #4

h2so4ca said:

I should have plenty of room to put something full of ice in there. What temp would you recommend that I keep the smoker at? 

Click to expand...

70 deg. or so..... smoke for 6-12 hours..... pull and refer for a day or so..... partially freeze and slice.... use that taste test as a guide for your next bacon....

I have smoked bacon for 36 hours over 6 days..... 6 hours/day.... Bride didn't like it... now I'm down to 4 hours cold smoke and she thinks it's perfect..... Too much smoke can be a bad flavor... I started with Pitmasters Choice.... it's very mild and almost sweet.... now I'm using hickory pellets.... BTW I use the AMNPS and mailbox mod for cold and hot smoking...

Here is an interesting explanation of cold smoking from "Old World" folks....
http://www.meatsandsausages.com/meat-smoking/cold-smoking

 

h2so4ca

Meat Mopper

Original poster

Thread starter

Dec 15, 2013

174

127

Seattle WA

• Aug 11, 2014

• #5

Thank you for the information. I am going to do a test smoke tonight and fill what would normally be my water pan in the WSM with ice. I'll see if the combination of night and a large pan (it will hold 3 gallons of water) of ice will allow me to be at that temp.

 

daveomak

SMF Hall of Fame Pitmaster

OTBS Member

★ Lifetime Premier ★

Nov 12, 2010

27,123

4,979

Omak,Washington,U.S.A.

• Aug 12, 2014

• #6

]Have you got room for a pop bottle, full of frozen water, in your smoker along with the meat.....[/I

h2so4ca said:

Thank you for the information. I am going to do a test smoke tonight and fill what would normally be my water pan in the WSM with ice. I'll see if the combination of night and a large pan (it will hold 3 gallons of water) of ice will allow me to be at that temp.

Click to expand...

I wouldn't use ice..... use ice in a sealed container.... the ice will add moisture to the air and dissolve the pellicle....

 

Last edited: Aug 12, 2014

h2so4ca

Meat Mopper

Original poster

Thread starter

Dec 15, 2013

174

127

Seattle WA

• Aug 12, 2014

• #7

I can do that, I have some large metal containers that seal that I can put the ice into. 

The test smoke I did for temp last night was right at 70 deg all the way through. So I think that will be alright.

 

daveomak

SMF Hall of Fame Pitmaster

OTBS Member

★ Lifetime Premier ★

Nov 12, 2010

27,123

4,979

Omak,Washington,U.S.A.

• Aug 12, 2014

• #8

Thumbs Up

 

h2so4ca

Meat Mopper

Original poster

Thread starter

Dec 15, 2013

174

127

Seattle WA

• Aug 15, 2014

• #9

photo.JPG

• h2so4ca
• Aug 15, 2014

One of the 10 lb bellies, the other one is on the rack below. 

The WSM is smoking along at 66 deg's with the AMPS in the bottom

full of hickory pellets. 

 

pc farmer

Epic Pitmaster

Staff member

Administrator

OTBS Member

★ Lifetime Premier ★

Feb 17, 2013

16,297

6,009

Central Pa

• Aug 15, 2014

• #10

Your gonna love that bacon.

 

oldschoolbbq

Legendary Pitmaster

OTBS Member

Jul 16, 2008

9,359

205

NW Ohio - outside Toledo

• Aug 15, 2014

• #11

I've yet to do a Belly , it is a 'save money for the purchase' item.  Sure hope things don't get much higher or I'll be learning to Smoke Worms  and the little critters in the "Hood".

Have fun and . . .

 

h2so4ca

Meat Mopper

Original poster

Thread starter

Dec 15, 2013

174

127

Seattle WA

• Aug 17, 2014

• #12

photo.jpg

• h2so4ca
• Aug 17, 2014

One of the trimmed ends. 

This was smoked for 16 hours over hickory. 

I fried up some of the trimmings to give it a try. It taste very good but I think for the next batch I will do a little longer in the smoke.

The flavor seems to be a mix of bacon and ham. Of course it hasn't sat for any time after the smoking so that may change a bit. 

I also think that it needs a bit more salt in the flavor profile. I used Pop's brine and for a first attempt I think it is a great start. 

In the next batch I think I want to lower the sugar content of the brine by 1/4 of a cup per gallon and increase the salt by the same amount. Then I think I will increase the smoking time to 20 to 24 hours.