I;m confused ?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

james1nc

Meat Mopper
Original poster
Apr 11, 2014
271
23
jacksonville N,C
I have the OK Joe's which the fire box is in the right side and the smoke stack is on the left, I have seen some smokers that the smoke stack is on the same side as the fire box. wouldn't you lose a lot of your smoke and temp if the smoke stack is on the same side as the FB?  or do you add a turning plate to force the heat away from the smoke stack
 
 
I have the OK Joe's which the fire box is in the right side and the smoke stack is on the left, I have seen some smokers that the smoke stack is on the same side as the fire box. wouldn't you lose a lot of your smoke and temp if the smoke stack is on the same side as the FB?  or do you add a turning plate to force the heat away from the smoke stack
Yeah, there's a plate the forces the smoke heat to travel the length of the smoker before going up into the cooking chamber.  It's known as a reverse flow setup.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky