Mes 40 test updated with pics

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

blacklab

Master of the Pit
Original poster
SMF Premier Member
Jan 12, 2008
1,040
44
Battleground Wa







My 800 watt element went south last year. Wasn't a fan of it for the obvious reasons. The other day I replaced the cheap element to 1200 watts and upgraded the wirering. Thank you Texacajun!
icon14.gif
 Today I'll be putting it to the test with 3 racks of spare ribs. Chine bone and membrane removed. Using my own basic rub. Pre heating to 250  and using the amazen pellet smoker with pecan. Actuall cook will start @ 10 am an finish when done assuming around 3 pm. Yes I know the rules, Q view will follow. Well guys here's the finished product. The new element works like a dream. Pre heated in a reasonable time and recovered fairly quick as well. So glad I changed it out works like it should. Thank for looking
 
Last edited:
 
My 800 watt element went south last year. Wasn't a fan of it for the obvious reasons. The other day I replaced the cheap element to 1200 watts and upgraded the wirering. Thank you Texacajun!
icon14.gif
 Today I'll be putting it to the test with 3 racks of spare ribs. Chine bone and membrane removed. Using my own basic rub. Pre heating to 250  and using the amazen pellet smoker with pecan. Actuall cook will start @ 10 am an finish when done assuming around 3 pm. Yes I know the rules, Q view will follow.
Sounds Great Blacklab!!!

Texacajun is always a big help---I have referred to his list on MES Model numbers & equipment many times.

Sounds like you're all set now!!  

Be Back:

popcorn.gif


Bear
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky