Joining the Mini Movement

garyinmd · Mar 23, 2014

Fired up the new Mini today and can not get the temps below 300 Deg. Want to do a tri-tip later but 300+ seems to hot. I have both bottom vents shut, just closed top vent about half, not sure if this will help. Nothing special on the build, been watching the builds on here and copied.

Here it is after adding hot coals to the top

IMG_0433.JPG

garyinmd
Mar 23, 2014

I think the wood chunks took off, was over 400 deg with the only one vent on the bottom 1/2 open

IMG_0436.JPG

garyinmd
Mar 23, 2014

Have two probes on grate, Found out if I turn the lid so the top vent was in the middle of the probes it would get a lot closer side to side.

IMG_0441.JPG

garyinmd
Mar 23, 2014

Started the test burn at 11:30 this morning, the next two were taken at 2:00, hard to tell what is left.

photo 1.jpg

garyinmd
Mar 23, 2014

photo 2.jpg

garyinmd
Mar 23, 2014

Any help on lowering the temp would be great.

Thanks

Gary

newsmokeguy · Mar 23, 2014

I cant help u with temperature but can u tell me what it cost u 2 make up the mini? looks 2 be a good size for 1 person

demosthenes9 · Mar 23, 2014

How many briquettes are you lighting up ?

garyinmd · Mar 23, 2014

If your lucky enough to find some of the items on Craigslist they can be pretty cheap to make. I ended up having to buy everything new.

Smokey Joe Gold online $32

Steam pot at Target $25

New grate from hardware store $15

Bolts, nuts misc $15

The above is from memory but pretty close..

Gary

garyinmd · Mar 23, 2014

Demosthenes9 said:
How many briquettes are you lighting up ?

Filled the basket then dozen or so lit ones on the top.

garyinmd · Mar 23, 2014

Either the coals are running our or closing the top helped, around 280 deg right now. If I can get it down I know I will need to add coals later for the tri-tip, this was more of an experiment and burn in.

Gary

newsmokeguy · Mar 23, 2014

thx! that doesn't seem 2 bad

garyinmd · Mar 23, 2014

newsmokeguy said:
thx! that doesn't seem 2 bad

Due a search for "Mini" in the search bar and you will get a ton of info, many others have already invented the wheel.

Gary

mdboatbum · Mar 23, 2014

From this picture it looks like you're leaking a lot of smoke around the bottom of the pot. Where smoke can get out, oxygen can get in. It looks like you used the lid for the base, so maybe you just need to seal the joint between the lid and the bottom of the pot with some hi-temp silicone. And possibly run a bead around the lip that sits on the edge of the grill. You might be able to get away with just rotating the pot until it seals better. Mine would coast along at 225˚ no problem with one vent closed and one open around 1/4", so you've obviously got an air leak somewhere. For clarification, I didn't use the lid on the bottom. just set the pot in the grill and it sealed pretty tightly, though sometimes I did have to rotate it a bit for a better seal.

Keep tinkering, you'll get it dialed in!

garyinmd · Mar 23, 2014

Thanks Mdboatbum, never thought of that. When I filled it the coals were up into the bottom pot a bit and the wood chunks we towards the top which is why there is so much smoke. I did add the top to the bottom of the pot and gained a good inch of height but no big deal to drill out the rivets if I have to. I am just running with the steamer tray, need to get a terracotta pot next trip to store. Will keep playing around to get dialed in, will use MES tonight for tri-tip tonight, now I wish I had some chicken thawed to throw on with that high of temps.

Gary

pc farmer · Mar 23, 2014

You dont need a terra cotta pot, trust me.

My pot leaked like that too until it got some crud on it.

You need very little bottom vent for low temps.

garyinmd · Mar 23, 2014

Thanks farmer, guess the only way to crud it up is to use it. Going to be out of town for a couple of day so will have to play when I get back. Started to drop pretty quick so might be running out of coals, Opened bottom a bit and now steady at 285 deg.

Gary

pc farmer · Mar 23, 2014

Just pick the pot up and get a quick peek of the fuel situation.

garyinmd · Mar 23, 2014

Still a bit left, I opened one of the bottom vents a bit and it went back over 300 deg pretty quick. It has been 4 hours since I started the burn so now just checking to see what run time I get, I know running hot probably cost me some time.

EDITED TIME,

Gary

pc farmer · Mar 23, 2014

Temps will come down some with food in it too.

bdskelly · Mar 23, 2014

Gary

I just gave this a glance. What are you using for a diffuser? Different defusers will give different temps. In my experience using the steamer insert gets hottest. Followed by a disposable pie plate. Lastly using the terra-cotta saucer on my mini runs the coolest.

Brian

garyinmd · Mar 23, 2014

Thanks BD. I just have the diffuser in this trip. Also forgot to add at the beginning of my original post I had a mixture of KB and lump in my plastic container so it was a mix of both. From using lump before it seems to burn hotter so this could be part of the problem. As farmer stated food would probably help, this was a test and burn out of the new unit.

Going to keep it going, at least I can use the bottom with the extra grate I got to sear the tri.

Gary

bdskelly · Mar 23, 2014

Here is some test run data I ran on mine. Might be a good comparison to what you're seeing.

http://www.smokingmeatforums.com/t/155368/mini-weber-smokey-mountain-test-run-data

garyinmd · Mar 23, 2014

Thanks Skelly, I can see that I used way too many coals, had the basket over flowing by the time I added the hot ones to the top. Still holding at 5 hours, edited post above to 4 hours.

Gary

garyinmd · Mar 23, 2014

Not all was lost, was able to sear the tri-tip with the grate on the bottom, no time to play again until next weekend.

Shows where the temp sensors were located, only the steamer tray in the bottom

photo 2 (1).jpg

garyinmd
Mar 23, 2014

Here is the meat getting a good sear before seeing the towel and cooler

photo 3 (1).jpg

garyinmd
Mar 23, 2014

Till next time

Gary

Joining the Mini Movement

Smoking Fanatic

Smoke Blower

Master of the Pit

Smoking Fanatic

Smoking Fanatic

Smoking Fanatic

Smoke Blower

Smoking Fanatic

Master of the Pit

Smoking Fanatic

Epic Pitmaster

Smoking Fanatic

Epic Pitmaster

Smoking Fanatic

Epic Pitmaster

Smoking Guru

Smoking Fanatic

Smoking Guru

Smoking Fanatic

Smoking Fanatic

Similar threads

Hot Threads

Featured A couple thick strips please!