A-Maze-N-Tube and Yoder YS640

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

roharris33

Fire Starter
Original poster
Sep 19, 2013
43
10
Caledonia, Illinois
Hey everyone I just received my A-Maze-N-Tube yesterday. I plan on throwing it in my Yoder YS640 to add some additional smoke during the cook. I have a few questions:

1. I've heard that the tube works great at 225 degrees, but won't stay lit at higher temps (lack of oxygen) Is this true?

2. Where is the best location to place the tube?

3. Any other tips or tricks in regards to the tube?

I love the pellet smoker but want to add some additional smoke to the food during the cook. I've read a lot of good things about the tube and want to give it a shot. I look forward to reading your comments.
 
Ask Todd...he can tell you what works best for the Yoder.  Send him a PM and he will tell ya.

Kat
 
Center rear is a good location in the YS640, the fans do a great job of supplying air to the tube. Even when cold smoking in the YS640 just flip the controller on but don't engage the hot rod and the fans will be operating to assist for a good burn at the tube and assist air flow.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky