Fire in the smoker

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

blodzoo

Fire Starter
Original poster
Jul 1, 2013
36
11
Seattle
I've only got a couple smokes under my belt, both times were pork butt, so low temps.  I was getting ready to throw some chickens in there so I filled my water tray, smoke tray with alder, turned my Smoke Vault to Med and left it for about 10 mins.  Came back and the temp was up over 300, so I turned it down but the temp kept shooting up, so I opened the door to see all of my wood chips ablaze.

I know that I could soak the chips, but I've read that a lot of people don't prefer it so I just figured it wasn't necessary.  Has anyone else had this problem?
 
What happens if you start the smoker on low, get it up to temp, add the chickens and chips....    Chips added during start up, hit a hot chip pan.... add the chips after things have stabilized .....   I don't soak chips...  I add them after the smoker and chip pan has come up to temp....   

Dave
 
What happens if you start the smoker on low, get it up to temp, add the chickens and chips....    Chips added during start up, hit a hot chip pan.... add the chips after things have stabilized .....   I don't soak chips...  I add them after the smoker and chip pan has come up to temp....   

Dave
I do the same thing as Dave. Dry chips here as well, no soaking. 
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky